Tag Archives: Hanging

Steps to Install Your Vertical Hanging Garden

We are going to take
you through the steps to successfully install your %LINK% vertical hanging garden
from Flower Street Urban Gardens. 

You can read along
here in our directions. We also recommend that you follow along in the video
clip below for visual clues you might need. If you’ve already purchased a vertical hanging
garden
 from us, the parts that you have received will
include: 

  • the mounting brackets 

  • the number of wooden tiers

  • BPA-free food-grade
    liners 

  • end caps 

  • All the hardware, including
    screws and bit for end caps, Drip irrigation kit, and stakes

The only tool you’ll
need to set up a hanging garden is a tape measure and a drill driver. 

The brackets must be
anchored to something structural such as block or brick; with the anchors
provided, you will need a 5/16 masonry drill bit. If your garden is installed
on a wood frame structure, it may be necessary to install 2 or more ledger
boards. Now let’s get started on installing your vertical hanging garden. 

 

Step 1- Measuring Out
the Brackets

First, find the center
of the wall where you’re going to mount the brackets. The center is where you
place the first bracket. Now, if you’re installing a 6-ft. unit, then measure
28 inches from that center bracket on each side to hang the other two brackets.
If you’re installing a 5-ft. unit, then measure 24 inches from the center
bracket. If you have a 4ft garden, there will only be 2 brackets spaced
32” apart. 

For a bolt-on unit,
you will do the same measuring as above using the level to ensure all the
brackets are level and each bracket is vertical. This also ensures that it is
fastened into something structural that will accommodate the weight.

Step 2 – Sliding in
the Boards

The first board to be
installed is the one with the drainage diverter; slide those boards inside the
brackets. These boards stand upright and will allow the garden to drain. 

Take your tape measure
and measure the overhang on each side and make sure the sides are even with the
2 outside brackets. 

Step 3 – Placing the
Narrow Boards

Next, place the narrow
boards in, with the notched side down. There will be one for each tier. These
will rest on an angle on the face side of the tier. Stack two wide boards on
top of the narrow board. Repeat this step for the remaining tiers. 

Step 4 – Insert the
Remaining Boards

At this stage, the
only boards that remain will equal the number of tiers you purchased for your
kit. If you purchased the 4-tier unit, you would have four boards left. If you
purchased the 3-tier unit, you would have three boards left. These will go on
the top of the bottom backboards with the drainage sheets. 

Step 5 – Wedge in the
End Caps

The next step is to
wedge in the end caps. To do this, you will pull up on the face boards while
firmly pushing down on the end caps. Now you will install the screw provided.
One screw per board, taking caution to screw it into the plywood portion of the
end cap.

Step 6 – Install the
Liners

There are a front and
backside to the liner. The longest side goes to the front. It is easier to
slide the liner into the tier without opening it. Open liner to the back. (hot
tip) use the plastic stakes from your irrigation kit and clip on to the round
bar directly above the liner. Making sure to wedge the liner in between the
stake and the backboard.

Fill the liner
approximately half full of potting soil and adjust the liner again side to side
and front to back. Proceed to fill with potting soil.

Thank you for choosing
Flower Street Urban Gardens for your vertical hanging garden. If you have any
questions, reach out to us on our 
contact page or
call 602-327-6560.

Flower Street Urban Gardens believes
that gardening can be a practical and beautiful experience for everyone. We
make and ship our patented vertical gardening system all across the USA. Love
gardening? Try one of our hanging vertical gardens today! 

Elf Christmas Decorations For Your Vehicle or Fireplace


  • “HAVE YOU SEEN SANTA’S ELF?” – Start your Christmas right with these
    cute Elf Christmas Decorations. Decorate your car using the adorable elf
    legs for car to display the holiday spirit in a funny way. They’re also
    great for hanging in the fireplace, buried upside-down in the front
    yard in the snow, sticking out of the chimney, hanging out of the trunk
    of your car, and more. COLORS, DESIGNS AND STYLES WILL VARY AT RANDOM
    FROM IMAGES SHOWN.


  • EASY TO ATTACH. Add a humorous touch to your holiday-themed vehicle!
    Attach the elf decorations without damaging the place you put them. Hang
    it anywhere safely in your house, to your vehicle, or in the office.
    Make your place or vehicle more adorable with these hanging Christmas
    decorations! Each of the funny Christmas ornaments measures 24 inches in
    total length, 4 inches wide and 8 inches in the widest part. COLORS,
    DESIGNS AND STYLES WILL VARY AT RANDOM FROM IMAGES SHOWN.


  • WORKS WITH ANY VEHICLE. It just doesn’t feel like Christmas has begun
    until you start decorating. Feel the Christmas spirit on your vehicle by
    adding this great ornament. Use it on any car, motorcycle, or bike.
    You’ll get plenty of attention with this Christmas car decor as you park
    or move your vehicle. Perfect for anyone who is looking for something a
    little more unique in their Christmas decor! COLORS, DESIGNS AND STYLES
    WILL VARY AT RANDOM FROM IMAGES SHOWN.


  • SPREAD LOVE EVERYWHERE YOU GO. Brightly colored funny elf legs are the
    perfect Holiday decoration to spruce up your car. Park your car anywhere
    and receive a lot of compliments from people looking at the funny
    Christmas decor. Surprise people and watch their reaction in the rear
    view mirror.


  • HAVE A JOYFUL CHRISTMAS. Decorate your home with these Plush Santa and
    Elf Legs to get your friends and family into the Christmas spirit. These
    elf legs are made of high quality cotton cloth and felt cloth. You can
    reuse it again on the next holiday season or any special occasion. Let
    it stay in your house or on your vehicle as long as you want it!

Elf Christmas Decorations for Your Vehicle or Fireplace

1. Start your Christmas right with these cute elf Christmas decorations. Decorate your car using the adorable elf legs for car to display the holiday spirit in a funny way. They’re also great for hanging in the fireplace, buried upside-down in the front yard in the snow, sticking out of the chimney, hanging out of the trunk of your car, and more.

2. Add a humorous touch to your holiday-themed vehicle! Attach the elf decorations without damaging the place you put them. Hang it anywhere safely in your house, to your vehicle, or in the office. Make your place or vehicle more adorable with these hanging Christmas decorations! Each of the funny Christmas ornaments measures 24 inches in total length, 4 inches wide and 8 inches in the widest part.

3. It just doesn’t feel like Christmas has begun until you start decorating. Feel the Christmas spirit on your vehicle by adding this great ornament. Use it on any car, motorcycle, or bike. You’ll get plenty of attention with this Christmas car decor as you park or move your vehicle. Perfect for anyone who is looking for something a little more unique in their Christmas decor!

4. Brightly colored funny elf legs are the perfect Holiday decoration to spruce up your car. Park your car anywhere and receive a lot of compliments from people looking at the funny Christmas decor. Surprise people and watch their reaction in the rear view mirror.

5. Decorate your home with these Plush Santa and Elf Legs to get your friends and family into the Christmas spirit. These elf legs are made of high quality cotton cloth and felt cloth. You can reuse it again on the next holiday season or any special occasion. Let it stay in your house or on your vehicle as long as you want it!



Hanging Elf Legs

Season 4 Sparkles 4 Pieces Snowflake Stocking Holder

1. Complete decorating your home getting these SET with FOUR pieces of snowflake stocking holder. These Christmas stocking holders for fireplace mantle stay steadily on your plaster mantle. The perfect decoration for your fireplace to complement your home this holiday season.
2. Hang your stockings confidently on this beautiful mantle clip stocking holder. The sturdy stocking holders for fireplace mantle have a 2-pound capacity, and it does not require adhesives to keep the stocking holder in place. It’s enough to hold a lot of stuff on your favorite Christmas stocking and last for months!
3. Don’t hesitate to get this lovely christmas stocking holder for your fireplace. With the dimensions of 5.5 H X 3.25 L x 4.9 W inches, it’s not large to overwhelm other decorations. Designed from a durable stainless steel, each stocking hook is built to withstand full stocking stuffers, being just the right size for your stockings and mantle.
4. Sparkle your decorations with a twist of the mantel stocking holder. The snowflake design creates a unique look on your mantle and the texture and finish of the fireplace stocking holders make it a stylish decor on flat surfaces.
5. Spread the holiday spirit as you give a friend the christmas stocking hanger. They’ll love the design and how it fits their living room. A great choice of gift during the Christmas season. Perfect way for displaying stockings so Santa can reach them!

Perfect for Hanging Stockings